Skip to content

Free Shipping on all UK & US orders over £40 / $100 | 25% off our new Coffee Bags!

Previous article
Now Reading:
How to Make The Perfect Cafetière Coffee
Next article

How to Make The Perfect Cafetière Coffee

Coffee plunger, french press, cafetière - whatever its name, this humble little contraption is loved for its simplicity and the clear, untouched and honest coffees it creates. But whether your cafetière is a permanent fixture on your kitchen-top or just the celebrity guest brought out for the occasional lazy Sunday brew, we’ve got the perfect guide of dos and don'ts to make sure your getting the most out of your beloved french press.

What coffee should I use?

Our pre-ground coffees are perfect for this, but if you’re grinding your own beans, a medium-coarse grind is what you should be aiming for. A good way to test is when you plunge the coffee - if you struggle to push down, you’ve gone too fine; and if there’s hardly any resistance, you’ve gone too coarse.

We recommend our Signature Blend.  A sweet, smooth coffee dominated by a rare Nicaraguan Arabica, this full-bodied blend is full of high notes of berries and marzipan, with a slight twang of citric acidity. Deep & juicy, this makes an excellent cafetière!

How much coffee should I use?

Here at CRU Kafe, we recommend between a 1:10 and 1:12 of coffee to water, depending on exactly how strong you’re looking to make your cafetière. Another way of looking at this is between 10-12 tbsp of coffee per 1 litre of water, or around 1.5 tbsp per coffee cup.

Brewing time

A good rule of thumb is to leave your cafetière for 4 mins before plunging - but we like to get a bit more nitty-gritty here. For the more traditional espresso blends that include Robusta (such as our Espresso Blend) 4 minutes is still the absolute maximum, but for our 100% Arabica coffees (like our Honduran) you can afford to leave them to steep for a minute or two longer, if you like your coffee a bit punchier and richer.


Before you begin, we recommend that you preheat the plunger and decanting vessel with hot water

Step I

Weigh out your dosage and add the ground coffee to the plunger. Tap the plunger to make sure you have a nice even bed of grounds.

Step II

Start your timer and pour in the required amount of water depending on your coffee dose. Ensure that all the grinds are saturated and stir the brew back and forth 5 times. Then place the top chamber on top without plunging.

Step III

Let your coffee steep for 4 minutes. Depending on your desired strength, the time can be increased. Once the time is up, stir the crust and scoop off the foam. Doing this before you plunge will help reduce 'sludge' and give a cleaner tasting cup.

Step IV

Plunge and decant your coffee immediately - including any coffee left over in the cafetière itself.



Your cart is currently empty.

Start Shopping

Quick Add